Cartridge Filter Housing

IFAB 101 Design Filter Cartridge Housing

The 101 design cartridge filter housings are available for applications where materials
such as stainless steel are incompatible with the fluid to be processed.

The 101 housings are fabricated in polypropylene and are designed to hold multi-stacks of filter cartridges. This range of housings are suitable for 3, 5, 10 or 15 stacks of filters up to 40” in length.

This range offers additional flexibility by accepting either single openended or double opened cartridges of 2.5” diameter.

Material:

Polypropylene

Length: 10-40″
Sealing material: EPDM, Viton or Silicone
Max Pressure: 6 or 10 Bar available
Max Temp: 40°C

 

IFAB 104 Design Filter Cartridge Housing

IFAB’s plastic housings are knowned for high quality, preformance and economy. They are easy to use and are available in a variety of materials and sizes, in order to fit as many
applications. Plastic filter housings have been designed for use in a wide range of liquid applications. Most standard industrial disposable filter elements will fit this attractive range of filter housings, which include versions in polypropylene with clear or opaque bowls.
All housings will accept the industry standard Double Open End range of cartridges. Each of these models can be supplied with optional extras such as mounting brackets and releasing spanners.

 

 

Material:  Polypropylene and Glass-reinforced Nylon
Length: 5″, 10″, 20″
Sealing material:
Max Pressure: 6.2-8.6 Bar
Max Temp: 45-73°C

 

IFAB 106 Design Filter Cartridge Housing

The 106 Design can be used in a wide range of applications. We offer private label as an option for re-sellers. It can also be equipped with Neodym magnets for application were magnetic particles shall be trapped.

The 106 Design single cartridge housing is renowned for its high quality design and manufacture. With the ability to accept both standard Double Open End and Single Open End cartridges, this single stack housing with cast vee clamp closure has proved very successful in a wide variety of applications within the liquids processing industry.

The 106 Design will accept the full range of IFAB and industry standard cartridges ranging from 0.1 to 500μm with nominal lengths of 10, 20 and 30”.

Material:

316L Stainless Steel

Length: 10-30″
Sealing material: EPDM, Viton or Silicone
Max Pressure: 10 or 20 Bar available
Max Temp: 150°C

 

IFAB 112 Design Filter Cartridge Housing

The 112 design is a free standing housing that suits most pre-filtration applications.

The housing is available with multiple amount of cartridges (3-18 pcs) up to 40” long. The top opening style is equipped with a Cast Vee clamp as standard for pressures up to 10 bar.
These housings are widely used where low capital cost is of prime importance. Being floor mounted and therefore free standing, these housings will suit most pre-filtration applications. Bolted closures are an option available for all models.

The 112 design will accept either standard Double Open End or Single Open End cartridges. This includes the full range of IFAB and industry standard cartridges ranging from 0.1 to 500μm with nominal lengths of 10, 20, 30 and 40”.

Material:

316L Stainless Steel

Length: 10-40″
Sealing material: EPDM, Viton or Silicone
Max Pressure: 10 bar
Max Temp: 150°C

 

IFAB 113 Design Filter Cartridge Housing

The 113 design is a leg mounted, free standing housing that suits most applications.

The housing is available with multiple amount of cartridges up to 40” long. The top opening style is equipped with a Cast Vee clamp as standard for pressures up to 10 bar. Leg mounted and equipped with the more conventional dished end, these housings suit processes where there is a need to allow complete drainage of the clean chamber. This design assists in maintaining the general cleanliness of the process system. With the ability to accept both standard Double Open End and Single Open End cartridges. Bolted closures are an option available for all models.

The 113 design will accept the full range of IFAB and industry standard cartridges ranging from 0.1 to 500μm with nominal lengths of 10, 20, 30 and 40”.

Material:

316L Stainless Steel

Length: 10-40″
Sealing material: EPDM, Viton or Silicone
Max Pressure: 10 bar
Max Temp: 150°C

 

IFAB 114 Design Filter Cartridge Housing

The 114 design is a leg mounted, free standing housing with split shell design.
The housing is available with multiple amount of cartridges up to 40” of length. The centre positioned, split shell opening style is equipped with a Cast Vee clamp as standard for liquid pressures ranging from 7 – 10 bar. Equipped with the inverted dished end, this free standing housing with split shell design is the ideal choice when using Single Open End
plug in style cartridges. The simple to lift off lightweight dome allows full and easy access to the cartridges for rapid changeouts. With the ability to accept both standard Double Open End and Single Open End cartridges, this housing will suit most applications where finer levels of filtration are required. Bolted closures are an option available for all models.

The 114 design will accept the full range of IFAB and industry standard cartridges with nominal lengths of 20, 30 and 40”.

Material:

316L Stainless Steel

Length: 20-40″
Sealing material: EPDM, Viton or Silicone
Max Pressure: 10 bar
Max Temp: 150°C

 

IFAB 115 Design Cartridge Filter Housing

The 115 design is a leg mounted, free standing housing with split shell design.

The housing is available with multiple amount of cartridges up to 40” of length. The center positioned, split shell opening style is equipped with a Cast Vee clamp as standard for pressures ranging from FV – 10 bar. Leg mounted with the split shell opening, this is the ideal choice when using Single Open End plug in style cartridges. The simple to lift off lightweight dome allows full and easy access to the cartridges for rapid change-outs.

With the free draining clean chamber, the 115 design housings suit processes where cleanliness and ease of operation are essential. Accepting both standard Double Open End and Single Open End cartridges, this leg mounted, free standing housing will suit most applications.

The 115 design will accept the full range of IFAB and industry standard cartridges with nominal lengths of 20, 30 and 40”.

Material:

316L Stainless Steel

Length: 20-40″
Sealing material: EPDM, Viton or Silicone
Max Pressure: 10 bar
Max Temp: 150°C

 

IFAB 116 Easy Clean Design Filter Cartridge Housing

The 116 design is a leg mounted, free standing housing with dished end.

The 116 housing range is designed to accommodate 3, 5 or 10, stacks of filter cartridges up to 40” long. These top opening style housings are secured with screw clamps as standard and suitable

for pressures up to 16 bar in liquids and between 1.5 and 16 bar in gases. They are also suitable for full vacuum operation and processes between –10 and 150°C.

The housings are leg mounted and equipped with the more conventional dished end, therefore suit processes where there is a need to allow complete drainage of the clean chamber. This design assists in maintaining the general cleanliness of the process system. With the ability to accept both standard Double Open End and Single Open End cartridges, they will suit most applications.

The 116 design will accept the full range of IFAB and industry standard cartridges ranging 10, 20, 30 and 40”.

Material:

316L syrafast stål

Längd patroner: 20-40″
Tätnings material: EPDM, Viton eller Silikon
Max tryck: 10 bar
Max anv. temp: 150°C

IFAB 119 Design Hygien Filter Cartridge Housing

The ‘T’ style configuration is ideally suited to small pilot scale or laboratory based processes for pressures up to 10 bar.
The 119 design Hygienic single cartridge housing is available for elements up to 30” long. Base mounted, this free standing conventionally styled housing will suit processes where there is a need to allow easy access to all internal areas. This helps ensure the general cleanliness of the process system in which the filter is to operate. Having no loose internal components ensures easy, fast sanitisations and clean down procedures. The 119 design housing will accept the full range of
IFAB Single Open End industry standard cartridges ranging from 0.03 to 40μm with nominal lengths of 10, 20 and 30”.
Material:

316L Stainless Steel

Length: 10-30″
Sealing material: EPDM, Viton or Silicone
Max Pressure: 10 bar
Max Temp: 150°C

 

IFAB 120 Design Hygien Filter Cartridge Housing

This leg mounted, free standing housing with domed cover is the ideal choice for all
hygienic systems.
The 120 design housing is available in sizes from 3 to 30 cartridges up to 40” long. The ‘T’ style configuration with dome cover is equipped with a Cast Vee clamp as standard for pressures ranging from 4 – 10 bar. This leg mounted, free standing housing with domed cover is the ideal choice for all hygienic systems when using Single Open End plug in style  cartridges.
The simple lightweight dome allows full and easy access to the cartridges for rapid changeouts and the housings can be dismantled for full cleandowns.

The 120 design housing will accept the full range of IFAB Single Open End industry standard cartridges.

Material:

316L Stainless Steel

Length: 20-40″
Sealing material: EPDM, Viton or Silicone
Max Pressure: 10 bar
Max Temp: 150°C

 

OEM & Custom made

IFAB provides all customers the opportunity of customize their products, in order to get the ideal fit, for their application. Along with IFABs OEM-deal you spread your brand and hopefully make sure your customers become repeat.

Contact us for more information!