Filter Bag – Bag Filter Housing

IFAB PBH Design Filter Housing
IFAB PBH 410 & 420 Design is produced in polypropylen. These housings are made to sestain in harsh and agressive envirnonments such as acids or salt water.
IFAB PBH Design fullfilles both FDA and PED Classification up to 6 Bar.
This housing is available in two sizes, 410 (10 Tum) & 420 (20 Tum).
Please contact our sales department for further assistance.
Material: |
Polypropylen |
Sizes: | Special bags – 10″ & 20″ |
Sealing material: | NBR |
Max pressure: | 6 Bar |
Max temp: | 37°C |

IFAB 201 Design Bag Filter Housing
The 201 design bag filter housings are available for applications where materials
such as stainless steel are incompatible with the fluid to be processed.
The 201 is specifically designed to provide a low cost housing for bag filters. The housings are manufactured from polypropylene and available in 2sizes to accommodate single or double length bagsmanufactured with an industry standard 7” diameter ring.
The 201 design is a side entry, recessed basket design filter housing. The polypropylene restrainer basket has a high open area sealed with a bolted lid, which is advantageous compared to screwed lid models.
Material: |
Polypropylene |
Sizes: | 1 and 2 filter bags |
Sealing material: | EPDM, Viton or Silicone |
Max Pressure: | 6 or 10 bar available |
Max Temp: | 40°C |

IFAB 202 Design Bag Filter Housing
These housings are widely used where low cost is of prime importance and this makes them the ideal choice to replace conventional cast stainless steel strainers. The top opening style is equipped with a Vee clamp as standard for pressures up to 8.5 bar.
Material: |
316L Stainless Steel |
Sizes: | Size 3 and 4 filter bags |
Sealing material: | EPDM, Viton or Silicone |
Max Pressure: | 8,5 bar |
Max Temp: | 110°C |

IFAB 205 Design Bag Filter Housing
Material: |
316L Stainless Steel |
Sizes: | Sizes 1 and 2 filter bags |
Sealing material: | EPDM, Viton or Silicone |
Max Pressure: | 10 bar |
Max Temp: | 150°C |

IFAB 206 Design Bag Filter Housing
The 206 bag housings are designed for use with the industry standard 7” ring style bags, widely used in today’s process industries. The top opening style is equipped with a Cast Vee clamp as standard with the option of Rathmann style hinged and bolted closures for pressures up to 10 bar. The housing will accept the full range of IFAB and industry standard bags ranging from 1 to 2000μmwith nominal lengths of 407mm (P1) and 813mm (P2) and IFAB’s own 1220mm triple length bag.
The 206 design is infinitely flexible with adjustable legs and bottom outlet connection, making it ideal for batch applications, where free draining and frequent process changes take place.
Distinguished by its economy, high build quality and wide ranging options list, this housing can be used in almost all areas of the liquids processing industry.
Material: |
316L Stainless Steel |
Sizes: | Sizes 1 and 2 filter bags |
Sealing material: | EPDM, Viton or Silicone |
Max Pressure: | 10 and 16 bar |
Max Temp: | 150°C |

IFAB 207A Design Bag Filter Housing
The 207A Design has been designed to meet the demands of most liquid processing applications where bag filters have been selected.Our novel cast head incorporates an integral one piece inlet, double vent ports and features a special bolt retaining mechanism. The robust construction has seen these housings utilised in all areas of chemical and liquid processing. With minimal product hold up volumes and easy access to the disposable filter bag via the retained hinged lid, operators will always favour this style of housing when given a choice. Safety is also greatly improved for hazardous or high temperature fluids. The 207A Design filter assembly offers a cost effective and practical filtration solution for most liquid applications. Two housing sizes are available for the 7” diameter bags, P1 (407mm) single length and P2 (813mm) double length. Our perforated basket retains most standard commercially available filter bags found on the market today including steel ring, moulded polypropylene and many other types.
Material: |
316L Stainless Steel |
Size: | Size 1 and 2 filter bags |
Sealing material: | EPDM, Viton or Silicone |
Max Pressure: | 10 bar |
Max Temp: | 150°C |

IFAB 209 Design Bag Filter Housing
The 209 multi bag housings are designed for use with the industry standard
7” ring style bag. The top opening style is equipped with a Rathmann style bolted closure as standard for pressures up to 10 bar. A robust design with side in and bottom outlet connection, the 209 design is ideal for high flow, high dirt volume applications, where free draining and frequent process changes will take place.
2-12 bags. With the Rathmann style bolted closure as standard and manual davit, its simple operation has proved highly successful in many applications around the world. The high build quality and wide ranging options list make these vessels suitable for all high flow bag applications.
Material: |
316L Stainless Steel |
Sizes: | Size 1 and 2 filter bags |
Sealing material: | EPDM, Viton or Silicone |
Max Pressure: | 10 bar |
Max Temp: | 110°C |

IFAB 209 Easy Open Design Bag Filter Housing
2-12 bags. its simple operation has proved highly successful in many applications around the world. The high build quality and wide ranging options list make these vessels suitable for all high flow bag applications.
The housing will accept the full range of IFAB and industry standard bags ranging from 1 to 2000μm with nominal lengths of 407mm (P1), 813mm (P2) and IFAB’s own 1220mm triple length bag.
Material: |
304 or 316L Stainless Steel |
Sizes: | Size 1 and 2 filter bags |
Sealing material: | EPDM, Viton or Silicone |
Max Pressure: | 10 bar |
Max Temp: | 110°C |

Accessories to Bag Filter Housing
Full scale OEM available. All housings are supplied with all parts assembled. The logo is etched on the filter housings while a sticker is put on the packaging. This makes the product full scale OEM
and everyting is designed due to customer requirements.
OEM & Custom made
IFAB provides all customers the opportunity of customize their products, in order to get the ideal fit, for their application. Along with IFABs OEM-deal you spread your brand and hopefully make sure your customers become repeat.
Contact us for more information!
